Megger AVO210 Guia Del Usuario página 9

Non-Contact Voltage Alert (V
1. Volt sense switch will be activated on any function or at OFF status.
2. Test leads are not used for the Volt sense test.
3. Press the Volt sense button. The display will blank out, a tone sounds
and the red LED lights up to verify the instrument is operational. The
Volt sense button must be held down to detect the presence of voltage
without use of the leads.
4. If a voltage of 50V to 600V (50 to 500Hz) is detected near the top of
meter a continuous tone sounds and the red LED near the top of meter
illuminates.
www.megger.com
S )
OLT ENSE
9