Uniflame SG380-2 Manual De Instrucciones página 32

Troubleshooting (con't)
Problem Problem
Flame is yellow or orange.
Flame blow out
Flare-up
Persistent grease fire.
Flashback (fire in burner
tube(s))
Inside of lid is peeling-like
paint peeling
31
Contact 1-800-762-1142 for assistance.
Do not return to place of purchase.
Possible Cause Possible Cause
New burner may have residual
manufacturing oils.
Spider webs or insect nest in venturi
Food residue, grease or seasoning salt on
burner.
Poor alignment of valve to burner venturi.
High or gusting winds
Low on LP Gas
Excess flow valve tripped
Grease buildup.
Excess fat in meat.
Excessive cooking temperature.
Grease trapped by food buildup around
burner system
Burner and/or burner rubes are blocked
The lid is porcelain coated, not paint.
Burn grill for 15 minutes with the lid closed
Clean benturi.
Clean burner.
Assure burner venturi is properly engaged
with valve
Turn front of grill to face wind or increase
flame height
Clean grill.
Trim fat from meat before grilling.
Adjust (lower) temperature accordingly.
Turn knobs to OFF. Turn gas off at LP
tank. Leave lid in closed position and let
fir eburn out. After grill cools, remove and
clean all parts.
Clean burner and/or burner tubes
Baked on grease buildup has turned to
carbon and is flaking off. Clean thoroughly.
Owner's manual: model SG380-2 outdoor gas grill
Prevention/Cure Prevention/Cure
11/12/02