Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Instruction manual
PARTS DESCRIPTION
1. Control panel
2. Turntable shaft
3. Turntable ring assembly
4. Turntable Glass tray
5. Observation window
6. Door assembly
7. Safety interlock system
6
5
7
INSTALLATION AND CONNECTION
•
Remove all packing material and accessories. Examine the oven for any
damage such as dents or a broken door. Do not install if the oven is
damaged.
•
Remove any protective film, found on the microwave oven cabinet surface.
•
Do not remove the light brown Mica cover that is attached to the oven
cavity to protect the magnetron.
•
Select a level surface that provide enough open space for the intake
and/or outlet vents.
6
1
4
3
2
•
The rear surface of appliance shall be placed against a wall. A minimum
clearance of 7.5cm is required between the oven and any adjacent
walls. One side must be open. Leave a minimum clearance of 30cm
above the oven. Do not remove the feet from the bottom of the oven.
•
Blocking the intake and/or outlet openings can damage the oven.
•
Place the oven as far away from radios and TV as possible. Operation of
microwave oven may cause interference to your radio or TV reception.
•
Plug your oven into a standard household outlet. Be sure the voltage
and the frequency is the same as the voltage and the frequency on the
rating label.
•
Do not install the oven over a stove or other heat-producing appliance.
If installed near or over a heat source, the oven could be damaged and
the warranty would be void.
OPERATION INSTRUCTION
1. Use the power knob to choose the desired level setting, for the
different settings please refer the table below.
2. Use the timer knob to set the desired cooking time.
3. Please note as soon as the timer is turned the microwave oven starts
cooking.
4. After the cooking time is up, the microwave will "dong" which indicates
that your food is ready.
5. If the device is not in use, always set the timer knob to the "0" position.
Publicidad
Tabla de contenido
