Troubleshooting - GF Grafco -3 Manual De Operación

TROUBLESHOOTING

If the device does not function properly:
1. Ensure the battery is properly installed or replace the battery. Be sure to
observe proper polarity markings when replacing the battery. If the indi-
cator lights on the front of the unit no longer illuminate when it is turned
on, replace the battery and check again.
2. If the indicator light is flashing, the intensity has been adjusted, and no
stimulation is felt, check to ensure the lead wires are properly connected
and the electrodes are properly applied to the skin. If the unit appears to
be functioning and no stimulation is felt, the lead wires or electrodes may
need to be replaced.
3. If the battery appears to be charged and the unit is not functioning, turn
both intensity control knobs to the OFF position (counterclockwise). Then
gradually turn the intensity Control Knob (clockwise) until stimulation
is felt. If device still is not working, turn the unit off and contact your
authorized GF Health Products, Inc. distributor.
If there is any other problem, please contact an authorized GF Health Prod-
ucts, Inc. distributor. Do not try to repair a defective device.
13