Sony VPL-CS2 Manual De Instrucciones página 24

D:\Data\Oka\407983411VPLCS2CX1WW\02GB-
VPLCS2,CX1WW\04SET.fm
To adjust the volume
To cut off the picture
To control the computer using the supplied Remote Commander
To get the clearest picture
T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S
5
Turn the zoom ring to adjust the size of the picture.
6
Turn the focus ring to adjust the focus.
Caution
Looking into the lens when projecting may cause injury to your eyes.
Press VOLUME +/– keys. The volume can be adjusted for each of INPUT A,
VIDEO and S VIDEO input.
Press the MUTING PIC key on the Remote Commander.
To restore the picture, press the MUTING PIC key again.
When you connect an IBM PC/AT compatible to the projector, you can control
the mouse of the computer using the Remote Commander.
The R/L CLICK keys and joystick function as follows.
Key and joystick Function
R CLICK (front) Right button
L CLICK (rear) Left button
Joystick Corresponds with the movements of the mouse
Note
Make sure that nothing obstructs the infrared beam between the Remote Commander
and the remoter control detector on the projector.
You can adjust picture quality when projecting a signal from the computer.
1
Project a still picture from the computer.
2
Press the APA key.
"Complete!" appears on the screen when the picture is adjusted properly
Notes
• Press the APA key when the full image is displayed on the screen. If there are black
edges around the image, the APA function will not function properly and the image
may extend beyond the screen.
• When you switch the input signal or re-connect a computer, press the APA key again
to adjust the picture again.
• You can cancel the adjustment by pressing the APA key again while "ADJUSTING"
appears on the screen.
• The picture may not be adjusted properly depending on the kinds of input signals.
• Adjust the items in the INPUT SETTING menu when you adjust the picture manually.
masterpage:Left
.
23 GB
Projecting
VPL-CS2/CX1
4-079-834-11 (1)