Publicidad
INSTALLATION AND USE
FIGURE 1.9
To recharge the battery, disconnect it from the
light power cable, and connect the charging
cable provided. Now plug the charging cable
to the Main Power outlet and press the power
button on the battery pack. This will charge
the unit.
FIGURE 1.11
Place the new Outer Lens onto the front of the
L4
Light unit and press firmly into place so
™
that the side clips snap lock into position.
6 6
™
CONTINUED
FIGURE 1.10
Remove the old Outer lens from the
light unit by unclipping it from the sides.
Excessive wear of this item will effect the
efficiency of the brightness of the light and
format of the light.
FIGURE 1.12
Clean the L4
Lights Unit with a damp cloth
™
and mild detergent.
Warning: Do not use Volatile Chemicals or
submerse the L4
Lights in water as it may
™
cause injury or death from electric shock.
Publicidad
