Introduction; Recommended Settings - Skuttle Indoor Air Quality Products SK0-0055-001 Instrucciones Para La Instalación

Introduction

Packaged in a duct-mount configuration, this humidistat can be
mounted on either the return air duct or an interior wall of the
home.
DANGER:
• Disconnect electrical power to the furnace before starting
installation.
• Do not cut or drill any air conditioning or electrical
accessories during installation.
— Electrocution is possible if you come in contact with a live
electrical wire.
— Blindness can occur if refrigerant contacts your eyes.
CAUTION:
• Do not install the humidistat on any electrical system over 30
VAC.
• Be certain that all electrical wiring complies with local codes and
ordinances.
• Do not set humidity higher than recommended. Condensation
damage to the home may result.
• Do not set humidity up to recommended levels if there is conden-
sation on the inside windows of any living space. Condensation
damage to the home may result.
Outside Temperature
-20ºF (-29ºC)
-10ºF (-23ºC)
0ºF (-18ºC)
10ºF (-12ºC)
20ºF (-7ºC)
Above 20ºF (-7ºC)
For mounting the humidistat on the return air duct, see page 2.
For mounting the humidistat on an interior wall, see page 3.

Recommended Settings

1
Humidistat Setting
15 (Low)
20 (Medium-Low)
25 (Low-Medium)
30 (Medium)
35 (Medium-High)
40 (High)