Correct Use Of The Product - POLTI MONDIAL VAP 4500 Instrucciones Para El Uso

M.V.4500 M0S103740 1S11:Layout 1
CORRECT USE OF THE
PRODUCT
This appliance is intended for professional
use as a steam generator and liquid/damp
vacuum cleaner in accordance with the de-
scriptions and instructions provided in this
manual. Please read these instructions care-
fully and keep them for future reference.
Polti declines liability for any damage or
accident derived from any use of Mondial
Vap which is not in conformity with the
instructions contained in this booklet.
PREPARATION FOR USE
ASSEMBLING THE HANDLE (U) AND
BASKETS (V and Z)
• Insert the carrying handle (U) into the two
tubes to the side of the appliance and fa-
sten using the 4 screws (Y1) (Fig.1A).
• Attach the lower basket (V) and the upper
basket (Z) to the carrying handle (U) with
the screws (Y2), tightening them using the
appropriate
(fig.1B).
ASSEMBLING THE SIDE BASKETS (T)
• Loosen the screws with the fastening knob
located on the side tanks.
• Align the holes present on the side ba-
skets to the screws with the knob and in-
sert the baskets (fig. 1C).
• Fasten the screws with the knob to pre-
vent the baskets from accidentally coming
loose.
N.B.: the basket (T) that has the opening for
lodging the extension tubes must be positio-
ned on the water tank (I) (fig. 1D). If inverted,
the baskets will not be in a perfect horizontal
position.
FILLING THE WATER (I) AND DETER-
GENT (J) TANK
• Open the cap and fill the water tank (I)
with normal tap water using the funnel (23)
(fig. 2).
Use water with a hardness of less than 5° F.
24/01/2013
MONDIAL VAP 4500
hex wrench (provided)
14.50 Pagina 17
If the water from the mains supply is parti-
cularly hard, we recommend using a mix-
ture of 50% tap water and 50% deminera-
lised water.
To use tap water and avoid scale forma-
tion, we recommend the addition of the
special natural scale removal agent Kal-
stop FP2003. Quantity: we recommend
diluting one phial to 5 litres of water before
putting it in the tank.
• Replace the cap on the tank.
• Use the funnel (23) to fill the tank (J) with
the suitably diluted detergent.
• Replace the cap on the tank.
Use the two tubes at the tanks (fig. 12) to
view the level of liquid inside the tanks.
ATTENTION: never swap the contents of
the two tanks. It is important that the tank (I)
is always filled with water and not detergent.
Placing detergent in the water tank could
cause serious damage to the product.
Once the funnel has been used to fill the de-
tergent tank, rinse it under running water be-
fore reusing it to fill the water tank.
DETERGENT:
It is recommended to only use detergents
from the Polti HP007 PROFESSIONAL line
because they are specifically developed and
tested for using with Mondial Vap steam ap-
pliances.
Refer to the instructions on the product la-
bels for information on the correct dilutions
and on how to use the Polti HP007 PRO-
FESSIONAL products.
ATTENTION:
• Never use foaming or acid-based deter-
gents because they could damage the in-
ternal components of the appliance.
• Never use detergents containing muriatic
acid, ammonia or products classified as ir-
ritants because their volatility increases
when used with steam and, therefore,
could be harmful if inhaled.
• Any problems caused by the use of de-
tergents not conforming to those men-
17