Pinnacle Sun-Stream SSR-808G-IHR Manual De Usuario E Instrucciones De Funcionamiento página 6

Mounting:
Hanging Wall Mount
1. Attach the mounting bracket to a wall stud as
shown below using the four (4) included
wall mounting screws. (Figure 2)
Tip: Use the back plate of the wall
mounting bracket as a template to
pre-drill the holes for the mounting screws.
Wall Mounting Bracket
Back Plate
Wall Mounting
Screws
Figure 2
© 2018, Pinnacle Climate Technologies, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE
CONNECTED TO A POWER SOURCE
Assembly
2''X4''
STUD
The installer MUST be certain
CAUTION
the wall mounting bracket
is attached to a minimum of a 2''X4'' wall
STUD that is able to support 25 pounds
continuously.
DO NOT MOUNT HEATER ON
WARNING
THE CEILING. MOUNT ONLY
AS DESCRIBED ABOVE ON A 2''X4''
WALL STUD.
5 Halogen Infrared Heater User's Manual