Installation Requirements; Installation Checklist - Electrolux EFME427UI Instrucciones De Instalación

Installation Requirements

4
Please read and save
this guide
Thank you for choosing Electrolux, the
premium brand in home appliances. These
Installation Instructions are part of our
commitment to customer satisfaction and
product quality throughout the life of your
new appliance.
Exhaust Venting
ˆ Free-flowing, clear of lint buildup
ˆ 4 inch (102 mm) rigid metal or
semi-rigid metal transition ducting
of minimal length and turns
ˆ NO foil or plastic venting material
ˆ Approved vent hood exhausted to
outdoors
Leveling
ˆ Dryer is level, side-to-side and front-
to-back
ˆ Cabinet is sitting solid on all corners
Gas Supply (Gas Dryer)
ˆ Manual shutoff valve present in
supply
Tools and materials needed for installation:
ˆ All connections sealed with approved
sealer and wrench tight
ˆ Conversion kit for LP GAS system
ˆ Gas supply turned on
ˆ No leaks present at all connections
- check with soapy water, NEVER
check with flame
Water Hookup (Select Models)
ˆ Inspect hoses for proper placement
of rubber washers
ˆ Water supply is turned on
ˆ Check for leaks
ˆ Steam model dryers require use of
ASSEMBLY HOSE KIT #5304495002
(not included) and must be
purchased separately.
Questions?
Toll-free telephone and online support:
U.S.
1-877-4ELECTROLUX (1-877-435-3287)
www.electroluxappliances.com
Canada
1-800-265-8352
www.electroluxappliances.ca

Installation Checklist

240v Electric Supply
(Electric Dryer)
Door Reversal
Electrical Power
Final Checks
ˆ Registration card sent in
ˆ Approved NEMA 10-30 or 14-30
service cord with all screws tight on
terminal block
ˆ Approved strain relief installed
ˆ Terminal access cover installed
before initial operation
ˆ Follow detailed instructions in this
guide
ˆ Test hinge and latch for function
ˆ House power turned on
ˆ Dryer plugged in
ˆ Installation Instructions and Use and
Care Guide read thoroughly
ˆ Door latches and drum tumbles
when cycle starts