Changing The Picture Options - Samsung 3 Serie Manual Del Usuario

Changing the Picture Options

1. Press the MENU button to display the menu.
Press the ENtER
. Press the ▲ or ▼ button to select "Picture Options", then
press the ENtER
. Select the required option by pressing the ▲ or ▼ button,
then press the ENtER
. When you are satisfied with your setting, press the
ENtER button.
. Press the EXIt button to exit.
➣
In PC mode, you can only make changes to the
"Colour Tone" and "Size" from among the items in "Picture
Options".
♦ Colour tone: Cool/Cool1/Normal/Warm1/Warm
You can select the most comfortable colour tone to your eyes.
➣
The adjusted values are stored according to the selected
Picture mode.
➣
"Warm1" or "Warm2" is only activated when the picture mode is "Movie".
♦ Size: Auto Wide/1:9/Wide Zoom/Zoom/:/Just Scan
You can select the picture size which best corresponds to your viewing requirements.
♦ Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.
♦ 1:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
♦ Wide Zoom: Magnify the size of the picture more than 4:3.
♦ Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
♦ :: This is the default setting for a video movie or normal broadcasting.
♦ Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i) or
Component (1080i) signals are input.
➣
"Auto Wide" function is available only in "TV", "Ext." and "AV" mode.
➣
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
➣
Settings can be adjusted and stored for each external device you have connected to an input of
the TV.
➣
Temporary image retention may occur when viewing a static image on the set for more than two
hours.
➣
When Double (
➣
Wide Zoom: Move the screen up/down using the ▲ or ▼ button after selecting the
➣
Zoom: Select
Use the ▲ or ▼button to move the picture up and down. After selecting
use the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction.
➣
After selecting "Just Scan" in hDMI (100i) or Component (100i) mode:
Select by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select "Reset", then press the ENtER
You can initialize the setting.
O You can select these options by simply pressing the P.SIZE
button on the remote control.
button, to select "Picture".
button.
button.
, ) mode has been set in PIP, the Picture Size cannot be set.
pressing the ► or ENtER
by pressing the ◄ or ►button.
button.
English - 1
tV
Picture
Mode : Standard
Backlight
Contrast
Brightness
Sharpness
Colour
tint G 0
Picture Options
Reset : OK
Move Enter
tV
Picture Options
Colour tone : Normal
Size : Auto Wide
Screen Mode : 1:9
Digital NR : Auto
hDMI Black Level : Normal
Move Enter
TOOLS ,
button.
P.SIZE


9

0
0
R 0


Return





Return
by