jbc NASE-C Manual Del Usuario página 5

Changing grips
1. Push the grip with
the tabs onto the
handle.
Grip for NT115-A
Nano handle
Changing cartridges
Save time and change cartridges safely without having to switch the station off.
Removing
1
2
Place the cartridge in the slot
as shown and pull the handle
to remove it.
*Important
It is essential to insert the
cartridges as far as the mark
for a proper connection.
Mark
2. To remove the tabs,
hold the grip and
pull them out.
Use a pliers if
necessary.
Inserting
Push the cartridge into the
handle to the mark*.
Compatible cartridges
ø 0,6
The NT115-A works with C115 cartridges. Find the model that
0,2 x 0,1
best suits your soldering needs in www.jbctools.com
ø 0,3
Round Chisel Bevel
w w w.jbctools.com
Aligning
Use the holes to rotate
the cartridges for a proper
alignment.
1
0,3
2,5
Round Knife Stainless
bent steel chisel
2,4 x 0,6
High thermal
Ø2,5
performance
5