Publicidad
Main
Tripod
Column
Sleeve
Instruction:
1. Take out the main column from the tripod and assemble them with sleeve;
2. Put nuts inside the cases, and then insert one of the nut cases into the sleeve slot;
then fastened by screw;
3. Insert another nut cases into the tripod slot, and fastened by screw as well;
4. Insert the lock pin in the hole of main column to control the height.
Lock Pin
screws
nut cases
Put the lock pin in the
hole of main column
Fasten by screw
Fasten by screw
Main
Column
Lock Pin
Sleeve
Nut Case
Tripod
-5-
PBX-808TWS
Put nut in
the nut case
Insert the nut case
into the sleeve slot
Insert the nut case
into the tripod slot
Nut Case
Screw
Screw
Publicidad
