ABOX U80H Manual De Instrucciones página 12

EN
Battery installation
Adapter usage (Optional)
1. When optional AC adapter should comply with the requirement of I EC
60601-1: 2005. Furthermore all configurations shall comply with the
requirements for medical electrical systems (See IEC 60601-1-1 or
clause16 of 3Ed. of IEC 60601-1 respectively). Anybody connecting
additional equipment to medical electrical equipment configures a medical
system and is therefore responsible that the system complies with the
requirements for medical electrical systems. Attention is drawn to the fact
that local laws take priority over the above mentioned requirements If in
doubt, consult your local representative or the technical service
department.
2. When using AC power, to avoid possible damage to the monitor, use
only the exclusive AC adapter that can be purchased from authorized
dealers. Other adapters may vary in output voltage and in polarities.
3. Insert the adapter plug into the hole on the backside of the unit as
picture.
4. Insert the other side of the adapter into the outlet with 100-240V.
5. To remove the AC adapter, disconnect the adapter plug from the outlet
first and then disconnect the cord from the unit's socket.
Adapter technical features:
Output voltage: 6V ± 5%
Max. output current: At least 600mA
Output plug polarity : <+> inner
External diameter: 5.5 mm 0.1 mm
Internal diameter: 2.1mm 0.1mm
08