auna RockStage Manual De Instrucciones página 17

• PROGRAM: While in STOP mode, follow these steps to compile a playlist (with up to 20 tracks):
• Press PROGRAM. The Display shows "0".
• Use /
• Press PROGRAM again, to add the selected track.
• Repeat this procedure to add further tracks.
• Press PLAY/PAUSE to start/pause playback. Press STOP twice to delete the playlist.
Connect external media players to the LINE IN jack of the RockStage, using a 3.5mm audio cable. Use your
external device to control the media playback. Mind to turn the output volume of your external device up.
Use the VOL+/- buttons of the RockStage to adjust the volume then.
• Connect your microphones to the MIC1 and MIC2 jacks and adjust the microphone volume with the
MIC VOL knob.
• When using karaoke CDs (CD+G), you can use the AVC knob to adjust the balance of pre-recorded
vocal tracks and the microphone signal.
• Use the BALANCE knob to adjust the proportion of music and vocal volumes.
• Adjust the integrated echo effect with the ECHO knob.
• Select BT mode with INPUT or the BT button on the RC.
• Press PAIR, if no BT device is connected yet.
• Activate BT on your BT device and pair with the RockStage. Type in "0000", when prompted to enter
a password.
to select the desired track to add to your playlist.
LINE IN
Karaoke
BT
17