Safety Information; How To Operate/Use Ch-06 Charger - koban KEB-400C Manual De Uso

Safety information

• Please wear protective equipments while operating to make sure your
safety. Warning: This tool is not insulated.
• Please kindly check the crimping range and suitable crimping material.
Please make sure that your crimping material is suitable for this tool and
your crimping material is in the range of EP-EPL-4001/4201/3001/2501.
(You could find the range at this manual page 1) Do not crimp without any
material in crimping area, otherwise the tool will be damaged.
• Please do not put your hands/fingers in the working area while operating,
cleaning and testing. This action is very dangerous.
• Please do not aim at anyone while operating. This action is very dangerous.
• Before crimping, the dies must be fixed tightly to the dies holder.

How to operate/use CH-06 charger

• The charger CH-06 can charge Ni-MH Battery
B-02(14.4V).
• After discharging, while the temperature is below 40
degree, the charger will charge automatically.
Led meanings of situation
RED
RED
GREEN
GREEN
ORANGE
ORANGE
www.grupotemper.com
Twinkling
Shining
Twinkling
Shining
Twinkling
Shining
KEB-400C
Battery crimper
Waiting for operation
Temperature/Voltage
is over Buzzer buzzes
once a second
Well charged
Buzzer buzzes once five
seconds
Charging
Well discharged
Discharging
Instructions manual | 15