installation guide
STEP 7
Carefully flip the base over. Important: Two people are required to
move the bed base. Do not drag across the floor. Do not rest frame
on its side, excessive pressure may damage the legs.
STEP 8
Plug the power cord into a power source.
A surge protector is recommended.
STEP 9
Quickly test remote functions to verify proper setup before
placing mattress on base. Return the base to a flat position before
placing the mattress on top.
For customer support, visit www.ergomotion.com or call: 1-888-550-3746
STEP 10
Install mattress retainer bars by inserting both ends of mattress
retainers bar into holes on the platform and laying the bars
down with curved side facing up.
Setup is now complete! Test all functions on remote.
9