How To Install - BEGLEC JBSYSTEMS Light LED Marvel Manual De Instrucciones

ENGLISH

HOW TO INSTALL

The LED Marvel can be mounted in many different ways, you can choose one of these methods:
Table-Top operation: Mostly for "party" use!
 Mount the included tripod to the bottom thread insert of the main unit.
 Place the unit in a secure position where it can neither be touched by anyone or
could possibly become an objective for anyone to stumble.
 If necessary or possible, fix the tripod with three screws (not included) to the
supporting surface.
 Make sure the location and position secures safe distance from a spectator's
direct eyesight.
 For proper sound-to-light operation, leave the rear of the unit unobstructed.
 Choose an angle that provides safe standing so that the unit cannot accidently flip
over. Make sure the two longer tripod legs direct to the back of the unit.
 Connect the power supply and place the power supply in a location where nobody
can accidently stumble over the power supply or the cable.
 Make sure to comply with cooling requirements of the used power supply if any.
Wall-mounted operation: Mostly used to color a wall while being mounted on that wall, see drawings A & B.
 Mount the included tripod to the rear thread insert of the main unit.
 Place the unit in a secure position where it can neither be touched by
anyone or could possibly become an objective for anyone to stumble
or bang his/her head on it.
 Fix the tripod with three screws (not included) to the supporting
surface. Make sure the supporting surface can safely carry the weight
of the unit, which can be assumed when the surface can carry 10
times the unit's weight as a point load.
 Make sure the location and position secures safe distance from a
spectator's direct eyesight.
 For proper sound-to-light operation, leave the rear of the unit
unobstructed.
 Connect the power supply and place the power supply in a location
where nobody can accidently stumble over the power supply or the
cable.
 Make sure to comply with cooling requirements of the used power
supply if any.
Floor-mounted operation: Mostly used to color a wall while standing on the floor or hanging on the ceiling,
see drawings C & D.
 Mount the included tripod to the rear thread insert of the
main unit.
 Place the unit in a secure position where it can neither
be touched by anyone or could possibly become an
objective for anyone to stumble.
 If necessary or possible, fix the tripod with three screws
(not included) to the supporting surface.
 Make sure the location and position secures safe
distance from a spectator's direct eyesight.
 For proper sound-to-light operation, leave the rear of the
unit unobstructed.
 Choose an angle that provides safe standing so that the
unit cannot accidently flip over.
 Connect the power supply and place the power supply in
a location where nobody can accidently stumble over
the power supply or the cable.
 Make sure to comply with cooling requirements of the used power supply if any.
JB SYSTEMS
®
6/44
USER MANUAL
LED MARVEL