What If There Are Problems - Inanny N30 Guía De Usuario

10. What if there are problems ?

Faults
Power LED does
not light up after
switch-on.
An acoustic signal
sounds from the
parent unit.
No acoustic signal
sounds from the
parent unit.
The device
switches off
automatically.
The signal is weak,
the connection
keeps breaking
up or there is
interference.
Actions
Check whether
• The relevant adapter plug is properly plugged in,
• The batteries are full or the rechargeable battery
needs charging or is damaged (parent unit).
Check whether
• The maximum range has been exceeded
• The power supply unit for the baby unit is correctly
connected
• The baby unit is switched on
• The batteries are full or the rechargeable battery
needs charging or is damaged (parent unit).
• Adjust the volume on the parent unit.
• Replace the batteries or recharge the battery
(parent unit).
• Make sure the baby and parent units are not near
other electrical equipment,such as a television,
computer or cordless/mobile telephone.
• Try moving the parent unit and/or baby unit to
different positions in the rooms.
• lf the baby unit is too far away it may be out of range,
so move the baby unit closer to the parent unit.
13