Rear Panel - LTO TX8 Guia Del Usuario

Features

Rear Panel

6 7
2
1.
8
2.
5
3
4
3.
4.
5.
6.
4
7.
8.
1
AC Input: Use the included power cable to
connect this input to a power outlet. Make
sure the Power Switch is set to off when
connecting or disconnecting the cable.
Power Switch: Use this switch to power the
loudspeaker on or off. Make sure the Volume
knob is set to its minimum (counterclockwise)
position before turning it on.
Power LED: This LED lights up when the
loudspeaker is on.
Cooling Vent: Keep the area in front of this
vent clear from obstructions. The fan behind
the vent cools the amplifier, preventing
overheating.
Volume: Turn this knob to adjust the
loudspeaker's volume.
Input: Use a standard XLR cable (not
included) to connect your audio source to this
input. Make sure to set the Volume knob to
the correct position.
Link Output: Use a standard XLR cable (not
included) to connect this output to the input of
another loudspeaker
loudspeaker).
Signal Limit LED: This LED lights up when the
audio signal being sent to the loudspeaker is
"clipping" or distorting. If this LED illuminates
frequently or steadily, reduce the volume of
your audio source.
6
(i.e., another TX