EN
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check the DMX controller's User Manual or with the manufacturer as not all DMX controllers
have this capability. The COLORado Solo Batten supports RDM protocol that allows feedback to make changes to menu
map options. Download the User Manual from
Mounting
Before mounting this product, read the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/
Product Mounting Diagram
Overhead Mounting
Web Server
The COLORado Solo Batten Web Server can be accessed by any computer on the same network as the product. It
allows network access to system information, settings such as control protocol and starting address, color output testing,
and the ability to change the Web Server password.
To access the Web Server:
1.
Set the IP address of the network to have the same first digit as the IP address of the product.
2.
Enter the IP address of the product into the URL bar of a web browser application.
3.
Enter both the user name and password as admin to log in.
Control Panel Description
Button
<MENU>
<ENTER>
<UP>
<DOWN>
Passcode
After being prompted, enter the following passcode by pressing:
<UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
This passcode cannot be changed and must be used whenever prompted.
3
QUICK REFERENCE GUIDE
www.chauvetprofessional.com
Safety
Notes. Use at least one mounting point per product. Make sure the
Mounting clamp
Safety cable
Exits from the current menu or function
Enables the currently displayed menu or sets the currently selected value into the
selected function
Navigates upwards through the menu list or increases the numeric value when in a
function
Navigates downwards through the menu list or decreases the numeric value when in
a function
for more details.
Floor Mounting
Function
COLORado Solo Batten QRG Rev. 3