Philips PHILISHAVE 990 Manual Del Usario página 5

Charging
5
5 Insert the small plug into the shaver. Ensure
that the plug is pushed fully home. (Note the
indication mark.)
6 Mains voltages: 12 - 240 Volts. (The shaver
adjusts automatically.)
7 Ensure that the shaver is switched off. (Pilot
light in the switch not illuminated.)
The shaver can also be charged from a
12 - 24 Volts (DC) supply using cord connector
type HP 1957. (Available from Philips retailers or
Authorised Service Dealers.) Charging from a
12 - 24 Volts (DC) supply requires approx. 32 hours.
• It is advisable to charge the shaver at temper-
atures between 5° and 35° C (41° and 95° F).
This guarantees maximum life from the
rechargeable batteries.
• If you keep the shaver in the case when
charging ensure that the lid is left open to
prevent overheating.
• Before first use (or if the shaver has not been
used for a long time) it should be charged for a
period of at least 8 hours.
6
5
7