Tools
Camera
The phone supports 3 modes that can be set to capture
images and they are 160X120, 320X240 and 640X480.
n
Note
Built-in VGA camera with zoom and 3 image resolutions
(default set to 320 x 240). Increasing resolution will reduce
the number of images stored at one time.
You can access the camera feature directly by pressing
and holding the
(camera key) about 2 seconds.
Take Photo
(Menu 7.1.1)
Using the camera module built in your phone, you can
take pictures of people or events while on the move.
Additionally, you can send photos to other people in a
multimedia message.
The right soft key [Options] will bring up the following
options.
]
Image Size: Sets the image size to 160X120, 320X240
or 640X480. The selected image size displays on the
capture screen.
]
Brightness: This adjusts the brightness level of the
screen and there are 9 levels of setting.
48
]
White Balance: This adjusts the Light Effect level
Menu 7.1
and you can select from the following options: Auto
/ Daylight / Incandescent / Cloudy / Fluorescent.
]
Zoom: You can zoom in/out by the left/right navigation
key except 640X480 (default phone setting).
n
Note
In Take Photo mode, you can adjust the zoom scale by using
the up/down navigation keys. The maximum zoom scale
depends on the resolution as follows.
Resolution
]
Color Effect: Allows you to apply special effects to
the picture. Press the left or right navigation key to
find the tone you want to use the following options:
Color, Sepia and Mono.
]
Self Timer: Determines the camera timer.
]
Multishot: This feature enables the amount of
continuous frames that can be taken at one time.
The number of frames is determined by the image
size setting.
640x480
320x240
160x120
Zoom scale
x1
x1, x2
x1, x2, x4