Promax FA-405 Manual De Instrucciones página 67

USER'S MANUAL FA-405
Explain: When the message of F<cr> is sent to the power supply from computer,
the power supply will return the following message immediately:
The contents consist of the uppercase F and the numeral from 0 to 9.
Further details is described as follows:
st
1 f = the relay status 0:OFF 1:ON
nd
2 f = the temperature status 0: Normal 1: Overheat
rd
3 f = the wheel knob status 0: Normal 1: Fine
th
4 f = the wheel knob status 0: Lock 1: Unlock
th
5 f = the remote status 0: Normal 1: Remote(*)
th
6 f = the lock status 0: Unlock 1: Lock
NOTE: The setting is workable through computer only when the remote is at 1.
SV+
Function: Add one unit to the present voltage setting.
SV+<cr> HEX = 53 56 2B 0D
Syntax:
Explain: When the message of SV+<cr> is sent to the power supply from
computer, the power supply will add one unit to the present voltage
setting immediately.
Example: The present output voltage is at 20.00V, and the wheel knob status is at
normal, the SV+<cr> message is sent to the power supply, the voltage of
which will become 21.00V.
SV-
Function: Subtract one unit from the present voltage setting.
SV-<cr> HEX = 53 56 2D 0D
Syntax:
Explain: When the message of SV-<cr> is sent to the power supply from
computer, the power supply will subtract one unit from the present voltage
setting immediately.
Example: The present output voltage is at 20.00V, and the wheel knob status is at
normal, the SV-<cr> message is sent to the power supply, the voltage of
which will become 19.00V.
12/2003
Fffffff<cr> 7 characters totally + CR/LF
• • • • • •
1 2 3 4 4 6
Page 23