Dry the strip to remove excess water. Wait one
minute and compare the colour based on the
following indications:
• The strip is a light green colour
tap water is not very hard, you can set your
electronic cartridge lifetime indicator to six bars.
The cartridge can be used for up to a maximum of
45 days.
• The strip is a pink colour
water is hard, you can set your electronic cartridge
lifetime indicator to four bars. The cartridge can be
used for up to a maximum of 30 days.
You can activate your electronic indicator according
to water hardness as follows:
• First press the "RESET" button. Then press the
"RESET" button again and hold for a few seconds
until the arrow moves to the desired position: H
for hard water, S for soft water
• HARD WATER SETTING: When the arrow
beside the letter H, four fixed bars are displayed
and the arrow flashes. Release the "RESET" button
and wait until the arrow stays still. Release the
"RESET" button and wait until the arrow
remains fixed. Your indicator is then set for hard
(fig. 11b)
water
• Filter 1 litre of water immediately after
activating the electronic indicator.
• SOFT WATER SETTING: When the arrow
beside the letter S, quickly press the "RESET"
button once, six fixed bars are displayed and the
arrow flashes. Release the "RESET" button and
wait until the arrow stays still. Your indicator is
then set for soft water
• Filter 1 litre of water immediately after
activating the electronic indicator.
• When the cartridge needs replacing, the arrow
(fig.11c)
flashes
24
("A" fig. 10)
("B" fig. 10)
(fig. 11a)
.
(fig. 11a)
.
: the
: the tap
.
is
is
.