Silt Filter Bag Assembly - Vektro EV90 Manual De Usuario

Silt Filter Bag Assembly

Note: the silt filter bag is designed to capture finer particles such as silt.
The assembly of the silt filter bag is going to require the installation of the 2 rods, which
are used to reduce the amount of water kept in the bag during retrieval and to facilitate
the movement of the cleaner at the pool bottom.
Spread the filter bag over the top opening of the main body of
the pool vacuum. Make sure the cord of the bag is placed under
the flange of the top opening.
While holding the cord, press on the cord fastener and push it
under the flange.
TIPS: To secure the filter bag, when pushing the cord fastener
under the flange, pull one cord instead of two cords as shown
in diagram.
Lift up the bag to ensure it is totally secured before deploying
the pool vacuum into water.
14