Tabla De Contenido; Tools Required For Assembly - Rikon Power Tools 10-321 Manual Del Usuario

1. TOOLS REQUIRED FOR ASSEMBLY

Item Description
Phillips Screwdriver................................1
Adjustable Wrench.................................1
Square...................................................1
2. UNPACKING AND CHECKING CONTENTS
Model 10-321 14" Band Saw is shipped complete in one box.
A. Separate all parts from carton and check each item with Carton
Contents list below to make sure all items are accounted for, before
discarding any packing material.
B. Remove the protective oil that is applied to the table. Use any
ordinary household type grease and spot remover.
C. Apply a coat of paste wax to the table to prevent rust. Wipe all
parts thoroughly with a clean dry cloth.
CARTON CONTENTS
Item Description
A Main Machine w/Blade Installed................................1
B Table..........................................................................1
C Package Containing Open Stand ...........................1
D Bag of Loose Parts for Main Machine........................1
E Upper Table Trunnion Assembly...............................1
F Bag of Loose Parts for Stand.................................1
G Operator's Manual....................................................1
A
ASSEMBLY
Qty.
Qty.
B
C
4
LIST OF LOOSE PARTS IN BAG
Item Description
2-1/2" Dust port..........................................1
Hex Socket head cap screw M6x12..............2
Washer 6.........................................................2
Blade tension knob..........................................1
Crank handle...................................................1
Wa s h e r M 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Hex Nut M6.....................................................2
Hex Bolt M8x45..............................................1
Hex Nut M8.....................................................1
Wing nut M6.....................................................1
Tube.................................................................1
Washer 6.........................................................1
Hex Socket head cap screw M6x45..............1
Tool holder..................................................1
Pan head screw M5x10..................................2
M3 Hex "L" wrench.........................................1
M4 Hex "L" wrench.........................................1
M5 Hex "L" wrench.........................................1
Hex Bolt, washer, nut assembly M8..................24
Hex Bolt, washer, nut assembly M6....................4
Rubber foot.........................................................4
Hex Bolt M8x16..................................................4
Lock washer 8.....................................................4
D
F
E
Qty.
G