Publicidad
Idiomas disponibles
Idiomas disponibles
1
2
3
4
5
31
1
2
3
4
5
32
Selection of clone mode:
Programming Instructions
1. Select DIP position chosen brand. Example: FAAC 433, two DIPS up six DIPS down.
2. Press button 5 (hidden button) located in the hole under the four visible buttons.
3. Press ONCE and RELEASE, the buttom of our remote you will use to act as the cloned one.
4. Place together our remote to the original one.
5. Press and hold the button of the original remote until the LED of our remote flashes three times.
To use another button, repeat steps 1 to 5.
POSITION OF THE TX CLONER 433 AND THE RECEIVER YOU ARE GOING TO COPY.
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
EEE
TX Cloner 433 Mhz
6
7
8
Fixed
Code
6
7
8
Compatible
TELCOMA
TANGO
433.92 mhz
Compatible
V2
433.92MHZ
NOTE: you must move the knob to be copied from
to back, rubbing it on the back of the TX CLONER
433.
Publicidad
