Screen Settings; Function - Marmitek DOORGUARD 450 Modo De Empleo

SCREEN SETTINGS

Activate the screen by pressing the monitor button
By repeatedly pressing the menu button
following:
Brightness
Contrast
Color
Date
8
Time
Delete photo
Close
Adjust the setting by pressing the
button to confirm.

FUNCTION

As soon as a visitor rings the doorbell by pressing on the doorbell button, the
image will appear instantly on the monitor in the house. This way you can see
who is at the door before you decide to open it
home). To speak to the visitor, you simply press the monitor button
have also installed an electric door opener, you can open the door by pressing on
the door-open button
If you wish to look outside without anyone having rung the doorbell, press the
monitor button
If you wish those outside to hear you, press the intercom button
You can switch off the monitor's bell with the bell off button
off LED goes on. When the doorbell rings, the bell off LED will flash. Pressing the
bell off button
If the door bell rings, it automatically takes a photo. Press the play button
display the recordings. You can use the
pictures.
The symbol on the right top of the screen indicates how many photos have
not previously been viewed.
DOORGUARD 450
. (Only works if you have an image on the monitor)
. You cannot be heard outside when you do this.
again reconnects the bell. The blue LED will switch off
you can set the
or button. Press the menu
(or pretend you're not at
and to scroll through the
.
. If you
.
. The blue bell
to
9