Ewbank EP170 Manual De Instrucciones página 5

Using your Floor polisher EP170
DO NOT USE ON CARPET
Take care not to slip over when polishing floors,
they can become very slippery in the process.
Only use dedicated floor products, other
inappropriate detergents or types of polish could
leave the floor dangerously slippery.
Do not leave the product operating in one area for
a prolonged period of time as this may damage
your floor surface.
Applying floor treatments
• The recommended floor treatment is Ewbank
Floor Polish, which has been specifically
developed to compliment the EP170.
• Always read and follow the manufacturer's
instructions.
• Apply the treatment directly to the floor unless
instructions indicate otherwise.
Scrubbing / Cleaning the floor
• Heavily soiled surfaces may require the brush
attachments are used initially to loosen any
debris. Otherwise ensure that the white
scrubbing pads are attached (see page 4).
• Use the white scrubbing pads with floor cleaner or
Ewbank Floor Polish to remove stubborn stains
®
or old treatments from the floor surface.
• Unit must be plugged in the power socket before
use
• With your foot securing the head of the polisher
on the floor (1), pull the handle towards you (2)
and the product will start (Fig.10). Returning
the handle to its upright position will stop the
product.
®
Fig.10
2.
Pull back
to start
5
1.
Place foot
on base