Important Safeguards; Safety Warnings - M Confort E1200 Manual De Usuario

VII. IMPORTANT SAFEGUARDS
1. READ INSTRUCTIONS BEFORE USING.
2. DO NOT open or repair the unit with anyone who does not have adequate capacity.
3. To protect against electric shock, keep the unit dry. Do not immerse in water or any other
liquid.
4. Disconnect the unit from the power supply before filling the water tank, performing
cleaning / maintenance or moving the equipment.
5. Disconnect unit from power when not in use.
6. Do not insert any objects into the ven la on grille (inlet or outlet) while the equipment
is in use.
7. Keep the appliance away from any hot surface. Do not lubricate the appliance with paper,
cardboard, plas c or any flammable material during opera on.
8. Place the equipment on a stable, horizontal surface before opera ng.
9. For outdoor use, it must always be protected from rain and water.
10. The water level in the tank must be between the MIN and MAX marks.
11. Move the unit before filling the water tank. A er filling, do not lt the unit and avoid
moving it. If the unit needs to move a li le, do so gently to prevent the water in the tank
from overflowing and leaking.
12. Do not place any objects on top of the unit. The ven la on hole must not be obstructed
during opera on.
13. Do not use gasoline or flammable chemicals to clean the equipment. For light soiling,
use a so , damp cloth. For heavier dirt, use a li le detergent / degreaser on a so , damp
cloth.
14. Keep the air intake and air outlet clear of obstacles.
15. Do not hit or shake the equipment during opera on, otherwise the equipment will stop.
If this happens, restart the computer.
16. A er a period of opera on, dust and dirt may accumulate in the water tank. It is
recommended to change the water and clean the tank frequently.
17. Do not place the equipment under an electrical outlet.
18. Empty the water tank when the equipment is not going to be used to avoid bad odors.
19. Do not use this equipment for other than its intended use.
20. If you find that the equipment is malfunc oning, do not con nue using it. Contact the
technical service for repair.
16