Clone Mode - FAB LIGHTER CAR Manual Del Usuario

Lighter Car
V2
38
433.92 Mhz

CLONE MODE

Programming Instructions
1. Select DIP position chosen brand. Example: FAAC 433, two DIPS up four DIPS down.
2. Press hidden button located in the back of remote control to active the cloning mode.
3. Press the button ONCE AND RELEASE, on the transmitter CLON
4. Close together the transmitter with the original transmitter
5. Press and hold the button on the original transmitter. Note. If the procedure was copied correctly. The led on
the CLON transmitter will 3 flashes.
To use another button, repeat steps 1 to 5.
MODO CLON
Instrucciones de programación.
1. Seleccionar la posición DIP de la marca deseada.
Por ej.: FAAC 433, dos DIPS arriba cuatro DIPS abajo.