DJI D-RTK 2 Guía De Usuario página 3

Disclaimer
Thank you for purchasing D-RTK
the "Product"). Read this disclaimer carefully before using this Product. By using this Product, you
hereby agree to this disclaimer and signify that you have read it fully. Please use this Product in strict
accordance with the manual and be sure to pay attention to the Warnings. SZ DJI TECHNOLOGY
CO., LTD., and its affiliated companies assume no liability for damage(s) or injuries incurred directly or
indirectly from using, installing or refitting this Product improperly, including but not limited to using non-
designated accessories.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as "DJI") and its affiliated
TM
companies. Names of products, brands, etc., appearing in this manual are trademarks or registered
trademarks of their respective owner companies. This Product and manual are copyrighted by DJI with
all rights reserved. No part of this Product or manual shall be reproduced in any form without the prior
written consent or authorization of DJI.
This disclaimer is produced in various languages. In the event of divergence among different versions,
the Chinese version shall prevail when the Product in question is purchased in China, and the English
version shall prevail when the Product in question is purchased in any other region.
Warnings
1. To maximize the lifespan of the battery, remove the Intelligent Battery from the D-RTK 2 Mobile
Station when not in use.
2. Only use the D-RTK 2 in the corresponding frequency band and in accordance with local laws and
regulations.
3. DO NOT bend or fold the cables excessively.
4. Ensure that the D-RTK 2 Mobile Station is perfectly level when mounted and placed.
5. Only operate in an open environment free from radio interference. Turn off nearby devices using the
same frequencies as the D-RTK 2 Mobile Station (e.g. radio transceivers).
6. Ensure that the antennas of all the devices used are unobstructed when in use.
7. Only use genuine DJI parts or parts certified by DJI. Unauthorized parts or parts from non-DJI-
certified manufacturers may cause the system to malfunction and compromise safety.
8. Ensure that the D-RTK 2 Mobile Station and its components are free from contamination (e.g. water,
oil, soil and sand).
9. DO NOT attempt to disassemble any part of the D-RTK 2 Mobile Station that has already been
mounted prior to shipping.
10. Handle the sharp ends of the extension rod and tripod with caution.
11. Take necessary measures to protect the D-RTK 2 Mobile Station and batteries from water in rain,
snow, and/or thunderstorms. Operate with caution in severe weather conditions.
Introduction
The D-RTK 2 High Precision GNSS Mobile Station is a high-precision satellite signal receiver that supports
four global satellite navigation systems: GPS, BEIDOU, GLONASS, and Galileo with 11-band satellite
signal* reception. Its built-in OCUSYNC
stable data transmission under a variety of application scenarios. The D-RTK 2 Mobile Station can be used
as an RTK mobile base station to achieve centimeter-level positioning accuracy of an aircraft equipped
with a DJI RTK positioning system (such as Agras T20, T16, MG-1P RTK, Phantom 4 RTK, P4 Multispectral,
MATRICE TM 300 RTK, or Matrice 210 RTK V2). Its functions are uncompromised even in environments with
strong magnetic interference, for example, near high-voltage power lines or metal structures. The D-RTK
2 Mobile Station can also be used as a handheld mapping device to achieve enhanced precision in point
positioning during surveying and mapping, or lofting and other engineering applications. In addition,
the D-RTK 2 Mobile Station can be used as a stationary RTK base station to quickly build network RTK
services**.
* Refer to the Specifications for details.
** Supported later. DJI only provides technical services, users must comply with the local laws, regulations and
requirements for building network RTK services.
2
2 High Precision GNSS Mobile Station (hereinafter referred to as
TM
TM , LAN, and 4G data transmission links ensure uninterrupted,