Operation; Maintenance - Klarstein 10029816 Manual Del Usuario

Ocultar thumbs Ver también para 10029816:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

• The temperature is adjusted in the range of 11 °C—18 °C in the cabinet.
• When the power is connected, cooling system starts to work.
• The temp you want can be set by touching
than the set point Cooling system will be work normally. When the inside temperature lower than the set
point,cooling system stop working. And the inside temperature will be rise. When it rises above the set
point, Cooling System starts to work again, the cellar enter into cooling circles.
• The Light can be turned OFF or ON by touching
after 10 Min.
NOTE:
• After you setting the temperature, the LCD display will return to show the temperature in the cooler, but it
could turn to the point that you have set gradually.
Particular precautions
• In order to function at its potential, this wine cooler need to be placed on flat floor, with 2 cm spaces at
each side and 10cm at the backside.
• Use the adjustable ( iron case ) to place the coller fully horizontal.
• Avoid direct sunshine and carry high temperature.
• Hot food should be cooled down before placing in the cellar. Do not mix uncooked food with cooked food.
• Do not place heavy articles on the top of the cellar.
• Shut off power supply before cleaning cabinet.
• Take out wines and shelves, and then clean the cabinet with soda water first and with clean water last.
• Do not use soap or detergent for the cabinet.
• Clean the cellar regularly.
11

Operation

and
with your finger. When the inside temperature higher
.If your forget turning Off the light, It will be Turn off

Maintenance

Publicidad

Tabla de contenido
loading

Tabla de contenido