Use And Operation - Klarstein 10029377 Manual Del Usuario

1. Place the Juice bowl (5) on top of the main body, make sure the juice bowl in position so
it locks into the main body and cannot be removed.
2. Put the strainer holder (4) into the juice bowl.
3. Put the strainer (3) into the strainer holder.
4. Put the Juice Auger (2) into the strainer
5. Fit the Hopper (1) over the Juice bowl and turn in position so it locks into the main body.
6. Place the pulp tank so it fits in position on the left hand side of the juicer's main body.
7. Place the juice cup under the Juicer spout.
8. Slide the food pusher down the food chute. The pusher can only fit one way.
IMPORTANT: If the Juice bowl and lid are not correctly assembled, the Juicer will not ope-
rate. This is a safety feature. Please press the "R" button lightly to stop the Juicer, and over
press will damaged the motor of Juicer. Product prohibits idling condition before feeding
fruits and vegetables.
Using your Juicer
• This Slow Juicer is suitable for celery, spinach, carrots, apples, bananas, tomatoes, cucumbers,
balsam pear, all need the juice of fruits and vegetables, but not for the fruits and vegetables
which containing starch and please do not use this Juicer to squeeze sugarcane.
• Clean fruit and vegetables thoroughly, ready for juicing.
• If juicing fruit with stones or hard seeds, pit the fruit. Remove any hard inedible skins, i.e.
skin of melons, pineapples and mangoes prior to juicing. If citrus fruits are being used,
remove the skin prior to juicing. If pieces of fruit or vegetables are very large, chop them
to a size that will fit down the juicer's food chute.
• Ensure the safety clamps are locked in position on top of the juicer lid.
• Turn the control switch To On to juice fruits Press the food pusher slowly down until all fruit
or vegetables have gone through the juicer. Do not press the food pusher rapidly as the juicer
will not be as effective. CAUTION: do not put your hand or any other object in the food chute
during operation.
• The juice from the fruit and/or vegetables will flow directly into the juice cup and the pulp
will be collected in the pulp bin.
• When juicing is complete, ensure that the juicer's control switch is set to the OFF posi-
tion, the power is turned off at the outlet and the juicer is unplugged. It is now safe to
disassemble the unit.
• If the Juice Bowl is stuck and does not detach from the base, Press reverse button "R" 3-5
seconds. Repeat process 2-3 times. Then, push bowl upward while turning
Disassembling the Juicer
1. Remove the food pusher.
2. Remove the lid.
3. Remove the juice auger.
4. Remove the strainer holder & strainer.
5. Remove the juice bowl.

Use and Operation

8