Publicidad
Idiomas disponibles
Idiomas disponibles
Make sure the power switch is set to OFF position before you connect the device. Make sure all connections are made
properly in order to avoid hiss.
•
Adjust the volume: turn the VOL/MULTI knob or use VOL+/- on the RC.
•
Select the signal input source: press INPUT repeatedly to select AUX/USB/BT ot FM (tuner).
•
Press MENU, then VOL/MULTI (or MENU/ADJUST on the RC) to adjust treble, bass, or microphone effect.
•
Press MUTE to toggle mute on/off.
•
Press LIGHT repeatedly to toggle the light effetcs on/off.
•
Initially, connect the supplied antenna to the correspondingly marked connection jack on the rear.
•
Press INPUT to change to FM mode. The current frequency is schown on the display.
•
Use the TU+/- buttons to scan for stations (hold for an automatic scan in the desired direction; press for manual
search in steps of 0.05MHz.)
•
To save the current station to presets, press MEMORY, then press the desired number button on the RC. To recall,
simply press the corresponding number button, or use
•
Connect the microphones to the MIC1 / MIC2 / MIC3 input jacks. The device automatically notices when micropho-
nes are connected. Use VOL+/- or VOL/MULTI to adjust the volume.
•
Press MENU to adjust the microphone volume (MV) as well as the echo effect (EC).
•
Use MIC 3 VOL on the rear to adjust the volume for microphone 3.
•
Press INPUT to change to USB mode. Connect a compatible USB drive containing audio files to the USB slot.
•
Use
,
, and
•
Press INPUT to change to BT mode. The flashing BT LED indicates the device is in pairing state.
•
Activate BT on your BT device (smartphone/tablet/laptop PC) and pair with 10026820.
•
When propted to enter a password, enter "0000".
•
The BT LED lights continuously when the connection attempt was successful.
•
Use your external media device to operate the playback.
Operation
, to navigate through your media library.
Initial Use
Basics
Radio
/
.
Karaoke
USB
BT
15
Publicidad
