Using Scan Mode (Multiple Cameras Only) - Lorex Baby SWEET PEEP Manual Del Usuario

Using Scan Mode
When two or more cameras are connected, you
may use Scan mode to cycle through video from
each camera. Each camera channel is displayed
for 10 seconds.
To enable Scan mode:
ugh
as.
er
To connect additional cameras to the monitor,
see "Pairing Additional Cameras" on page 19.
1
Press
2
cycles through the connected channels.
Current channel
(multiple cameras only)
Scan
Press repeatedly until
Scan is shown on screen.
to exit menu. The monitor
1 Scan
9
Scan mode
activated