Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
4
Installing the light bulbs and glass
bowl for fans with pull chains
□
With the power off, install the two LED bulbs (Max. 9.5 watts
included) (C) by screwing them into the light bulb sockets.
□
Pass the fan switch chain through the hole in the bowl cap
(JJ) of the light kit assembly (A). Position the glass bowl (B)
over the threaded nipple and raise it up to the bowl cap (JJ).
□
Install the bottom cover (AA) over the threaded nipple, and
direct the fan switch chain through the side hole of the
bottom cover (AA).
□
Install the finial over the threaded nipple and direct the light
pull chain through the hole of the finial and tighten the finial
securely.
□
Attach the pull chain extensions (DD) provided to the light
pull chain and fan pull chain.
5
Installing the light bulbs and glass
bowl for fans without pull chains
□
With the power off, install the two LED bulbs (Max. 9.5 watts
included) (C) by screwing them into the light bulb sockets.
□
Position the glass bowl (B) over the threaded nipple and
raise it up to the bowl cap (JJ).
□
Direct the light pull chain through the hole in the bottom
cover (BB) and the finial (CC). Place both on the threaded
nipple and tighten the finial securely.
D
C
D
C
5
Please contact 1-855-HD-HAMPTON for further assistance.
JJ
AA
CC
DD
E
FF
JJ
A
B
BB
CC
HAMPTONBAY.COM
Publicidad
