BLUETOOTH® WIRELESS PLAYBACK
THE UNIT CAN WIRELESSLY STREAM AUDIO FROM ANY BLUELOOTH® DEVICE
WITHIN 30 FEET. SIMPLY PAIR THE DEVICE AND ENJOY WIRELESS PLAYBACK
AND CONTROL FROM YOUR BLUELOOTH® DEVICE.
PREPARE THE UNIT:
- SWITCH THE ON/OFF SWITCH TO TURN THE UNIT ON.
- THE BLUELOOTH® LED INDICATOR WILL FLASH TO INDICATE THE UNIT IS ON
AND WAITING FOR PARING.
- THE LED INDICATOR WILL REMAIN LIT ON WHEN PAIRED.
*NOTE ONLY ONE DEVICE CAN BE PAIRED AT ANY GIVEN TIME.
PREPARE YOUR PHONE OR OTHER BLUETOOH® DEVICE:
- TURN ON THE BLUELOOTH® FUNCTION, THIS IS USUALLY FOUND UNDER
GENERAL SETTINGS OR OPTIONS.
*PLEASE REFER TO YOUR DEVICE'S MANUAL FOR FURTHER BLUELOOTH®
DETAILS.
MAKE THE CONNECTION:
- GO TO YOUR DEVICE'S BLUELOOTH® SETTINGS
- ADD OR SEARCH FOR DEVICES
- IF ASKED FOR A PASS CODE, ENTER "0000"
*THIS IS A ONE-TIME EVENT PER DEVICE. TO PAIR YOUR UNIT TO ANOTHER
DEVICE, REPEAT THE ABOVE PREPARATION AND CONNECTION STEPS.
DISABLING THE CONNECTION TO UNPAIR A BLUELOOTH® DEVICE THAT IS
ALREADY PAIRED, PRESS AND HOLD THE PAIR KEY FOR A FEW SECONDS.
VOLUME CONTROL:
INCREASE AND DECREASE VOLUME USING THE VOLUME UP AND VOLUME
DOWN KEYS ON THE UNIT OR USING THE VOLUME CONTROLS ON YOUR
BLUELOOTH® ENABLED DEVICE.
*NOTE THAT IF THERE IS NO PLAYBACK, ENSURE THAT NEITHER THE UNIT
NOR YOUR BLUETOOH® DEVICE ARE SET TO ZERO VOLUME AND THE
CORRECT DEVICE FOR PLAYBACK IS PAIRED.
E-5