Changing Batteries - Axion STIM-PRO T-400 Manual De Instrucciones

CHANGING BATTERIES

When the low battery indicator is shown, the battery needs
to be replaced. Remove the battery if the device is not likely
to be used for some time.
Make sure the power is off.
Open the battery compartment by sliding down and
removing the front cover.
Remove the battery.
Insert the new battery. Please check that the polarity is
correct!
Close the battery compartment. Attach the cover to the
bearings at the bottom of the device and slide upwards.
STIM-PRO T-400
EN
29