Cm2 Hardware Reference; Cm2 Interface Board Hardware Information; Dry Contact Closures - CHIEF CM2L40 Instrucciones De Instalación

CM2L40
1st Position of switch array
1st Position of connector array
CM2 Connectors and Switches

CM2 Interface Board Hardware Information

(See Figure 31)

Dry Contact Closures

The unit provides dry contact outputs for system feedback, or to control other devices.
To complete circuits to external devices:
1. Connect the common wire from your switch to terminal 7. (See Figure 32)
2. Connect the 'up' wire from your switch to terminal 5.
3. Connect the 'down' wire from your switch to terminal 6.
20
1st Position of connector array
Figure 31
Figure 32
Installation Instructions