Orima ORM-128-X Libro De Instrucciones página 227

CHAPTER -9: TROUBLESHOOTING
FAULT
Excessive foam is
formed in the detergent
drawer.
Unsatisfactory washing
result.
POSSIBLE
CAUSE
Excessive amount
of detergent used.
Wrong detergent used.
The contamination de-
gree of your laundries
does not match the
programme you have
chosen.
Amount of detergent
used insuficient.
Laundries in ex-
cess of maximum
capacity put in your
machine.
EN -71-
TROUBLE-
SHOOTING
Press on Start/Pause
button. To eliminate foam
formation, mix a spoon
of softener with half
litres of water, and pour
the mixture in the deter-
gent drawer. After 5-10
minutes, Press on Start/
Pause button again. In
your next washing opera-
tion, Adjust the detergent
dose accordingly.
Use detergents pro-
duced only for automat-
ic washing machines in
your machine.
Select the programme
appropriate for the
contamination degree
of your laundries. (See
programme table)
Adjust the amount of
detergent based on the
amount and contami-
nation degree of your
laundries.
Load your machine with
laundries, amount of
which will not exceed
maximum laundry ca-
pacity.