Installation - Glacier bay 67626-0001 Guía De Uso Y Mantenimiento

Installation

1
Installing the faucet assembly
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□
Shut off the water supply. Remove the old
faucet.
□
Place the gasket (B) on the bottom of the new
faucet assembly (A).
□
Place the faucet assembly (A) in position on the
sink.
□
Secure the faucet assembly (A) to the sink
with the easy install nuts (C) provided. Push
up the easy install nuts (C) to sink and
hand-turn to tighten, as shown in the Fig 1.
NOTE: If the sink is uneven, use silicone under the
gasket (B).
C
Sink
Push
up
C
A
B
Screw
Sink
Fig 1
2
Making the waterline
connections
□
Use 1/2 in. I.P.S. faucet connections (2), or use
supply line coupling nuts (3) (not included) with
a 3/8 in. O.D. ball-nose riser (1).
□
Use wrenches to tighten the connections. Do not
overtighten.
15
1
3
2