W O L F
S T E A M E R M O D U L E
C A R E
R E C O M M E N D AT I O N S
C O M P O N E N T
C A R E R E C O M M E N D AT I O N
CAUTION: Make sure the steamer module is off and all surfaces are cool
Domed Glass Lid
before cleaning any part of the unit.
Glass
The reversible domed glass lid can be placed in the dishwasher or cleaned
with warm soapy water, then rinsed and thoroughly dried.
Steamer Module
Exterior Cleaning: Use a soft, nonabrasive stainless steel cleaner like Signa-
Frame
ture Polish and apply with a soft lint-free cloth. To bring out the natural
luster, lightly wipe the surface with a water-dampened microfiber cloth,
Stainless steel
followed with a dry microfiber cloth. All work should follow the same grain
direction as the finish. Best results are obtained by keeping the cloth in
continuous contact with the metal.
For best results, wipe up spills and spatters as they occur and immediately
after the module has cooled. If splatters are allowed to dry, they may perma-
nently damage or stain the finish.
CAUTION: Do not use abrasive cleaners (e.g., Scotch-Brite or Soft Scrub);
they will permanently scratch the surface.
Steamer Basin
After emptying the water from the steamer basin, pour 3.8 L water with dish
soap into the empty basin. Scrub with a nylon brush. Rinse well and drain.
Stainless steel
Dry thoroughly.
Hard water calcium deposits: Clean with white vinegar and water or a
cleaner designed to remove minerals. Let mixture stand in the steamer basin,
then scrub with a nylon brush or dishcloth. Rinse well.
Soft water salt deposits: Wipe out with a wet cloth. Rinse well.
WARNING: Pay particular attention to the drain outlet and manual valve
when emptying, as water may be hot. Allow unit to cool.
Insert Pans
Both the solid and perforated insert pans can be cleaned by hand with warm
Stainless steel
soapy water or placed in the dishwasher.
Control Panel
Use warm soapy water with a soft cloth to remove fingerprints and residual
Ceran glass
food and water stains from the control panel. Apply cleaner to the cloth
before wiping panel. Do not use aggressive commercial cleaners, as they
may damage the assembly.
U S E & C A R E
15