Remote Controller (Top Panel) - Teac Tascam CD-X1500 Manual Del Usuario

English

2-3. Remote Controller (Top Panel)

0 OPEN key
Opens and closes the appropriate tray.
NOTE
... These keys cannot be used when direct
mode (Preset menu) is off and a disc is
being played back.
q SEARCH key
Turns on or off the Search function on the Jog
wheel. When this key is lit, the Jog wheel acts as
a search dial. After 5 seconds without search
operation, the unit will exit the search mode
automatically.
w P.MODE / PGM key
Selects the play mode, either continuous play (all
play), single play (1 track play), or programmed
play.
Continuous play:
Single play:
Programmed play:
Pressing and holding the TIME/ENTER/SHIFT
key while pressing the P.MODE key, enters
program edit mode.
8
TASCAM CD-X1500 DUAL CD PLAYER
No indication in the
LCD
SINGLE indicator in the
LCD will light
PROGRAM indicator in
the LCD will light
2. Functions and Controls
e TIME/ENT / SHIFT key
Selects the time display mode, either elapsed,
remain, or total remain.
ELAPSED: Elapsed time will show in the
numerical portion in display, but no
additional indicator will light.
REMAIN: REMAIN indicator in the LCD will
light
TOTAL REMAIN: The track number display area
shows the number of tracks of
inserted disc, however, for 5 seconds
in the end of track, the current track
number flashes and for 5 seconds in
the beginning of the track, the
current track number lights.
Another function of this key is the modifier key
(SHIFT function). Holding SHIFT while pressing
another key performs the following functions;
SHIFT + P.MODE:
SHIFT + FLASH:
SHIFT + SET:
SHIFT + TEMPO:
SHIFT + BEND -:
SHIFT + BEND +:
SHIFT + TAP:
SHIFT + Jog Wheel:
SHIFT + B:
SHIFT + CUE:
Program edit
Track memory recall
Track memory
Memory bank select
Auto cue on/off
Auto ready on/off
Parameter display select
Preset
Loop end point edit
Select the CUE key's
operation