Operating Instruction; Toast - Kenmore toast'n'wave 721.63292 Guía De Uso Y Cuidado

OPERATING INSTRUCTIONS
• Make sure the crumb tray is pushed all the way in place before plugging toaster into wall outlet.
• Remove all protective wrappings from food before placing into toasting slots. Place bread into slots and close the
door. Then select either the Toast or Bagel mode. The default setting is 5. Press the "lighter" or "darker" pad to
adjust setting to individual taste. When you press the Start button, the heating element will turn on.
• If you are only using one toasting slot, uneven browning may occur. ]f you
operate toaster several times using one slot continuously, the toaster's internal
temperature will be hot and may cause "Hot" to appear in the display. This will go
away after several minutes after the toaster cools down.
• Do not adjust the Darkness Control while the toaster is in use. To interrupt the
toasting cycle, press the "stop/clear" control button.
• During the toasting cycle, the indicator light will be illuminated. If you open the
door, toasting will stop and the light will blink. The toasting cycle can be resumed
by closing the toaster door and pressing the start button.
• When the beep sounds, take out food. being careful not to touch toaster's hot
surface.
NOTE: After use of toaster, fan will run for 1 minute to cool.
Toast/Bagel Darkness Settings
Degree of darkness Select darkness level
Light 1~3
Medium 4~6
Dark 7~9
NOTE : For English Muffins, use bagel settings.
Toast
This toaster automatically determines required cooking times for toasting
Example : To toast bread at level 3.
Touch: Display Shows: Indicator light
1.
2.
Time of day
5 TORST_,,r
Trw T T T rw I If I
,u_5,E_ 5,R_,u£ LEVEL
off
.
4.
Twice
9 TC, RST _.r
IUUL_'_
TORS TER5 TRf2 T
9 TC, RST
Starts toasting.
off
on
22