PharmaJet Tropis Instrucciones De Uso página 11

Insert the Syringe and Vial Assembly into the Inner Core Housing of the
a)
charged Injector until it "clicks" into place, as shown in figure 10.
Invert and remove the Filling Adapter & vial from Syringe by employing a
b)
counterclockwise turn.
NOTE: If needed, remove protective Syringe Cap.
With forefinger, depress and hold the Injector Safety Button. This allows
a)
the Inner Core Housing to retract freely, as shown in figure 11.
While holding the Safety Button, press the Syringe perpendicular to
b)
the injection site, as shown in figure 12. Once the Inner Core Housing
is retracted, it is not necessary to hold the Safety Button as long as
you keep pressure on the patient and the Inner Core Housing remains
retracted.
3) Load Injector
figure 10
4) Give Injection
figure 11