Use According To The Intended Purpose; Safety Instructions - Eaton E5224C Serie Instrucciones De Operación

Contents:
Timer
Clamp
Front frame for screw mounting,
Panel cut-out 50 x 25 mm [1.97 x 0.98 in.]
Front frame for clamp mounting,
Panel cut-out 50 x 25 mm [1.97 x 0.98 in.]
Seal
Operating instructions
Installation:
DC versions:
Use shielded wires for the counting and control inputs to
obtain the maximum EMC resistance.

Use according to the intended purpose:

This device may only be used inside as a panel-
mounted device! Applications of this product may be
found in industrial processes and controls in the branch
of the manufacturing lines for the metal, wood, plastics,
paper, glass, textile, etc., processing industries. It must
be considered that the overvoltages at the terminals of
the device must be limited to the values of overvoltage
category II. Overvoltage category II is described in the
standard EN 61 010 Part 1.
This device shall only operate when it has been
correctly mounted in a panel. It may only be used in
accordance with the chapter "Main technical features".
This device shall not be used:
– in areas with risks of explosion,
– in the branches expressly quoted in the standard
EN 61 010.
If this device is used to monitor machines or a process
in which, in case of a failure of the device, there might
be risks of damaging the machine or causing accidents
to the operators, it is up to you to take appropriate
safety measures.
4
Note:
This product includes a lithium battery. Do not
open it by force, do not throw it in the fire.
Avoid temperatures below -20°C [-4°F] and
above 70°C [158°F]!
AC/DC versions:
Use shielded wires for the counting and control inputs to
obtain the maximum EMC resistance.

Safety instructions:

Only use these counters
– according to their intended
!
purpose
– if their technical condition is
perfect
– adhering to the operating
instructions and the general
safety instructions.
Also take into account the fact that there may exist user
or country-specific safety regulations, which must also
be followed.
MN05401006E