Atomic G01889W Manual De Instrucciones página 10

4 pcs - H8 Phillips Round Head Bolt
13 pcs - H10 Phillips Round Head Bolt
13 pcs - H11 Lock Nut
13 pcs - P20 Black Shirt / Yellow Shorts Player
STEP 9:
Slide P22 3 Player Rods, P23 5 Player Rod and
P21 2 Player Rod through P17 Rod Bushings of
one P1 Side Apron as shown in FIGURE 9.
IMPORTANT NOTE: Please note the location
of the hole that is near one end of each rod.
This is the handle end of the rod.
Place one P14 Rod Bumper on each rod as
shown in FIGURE 9.
Place P20 Black Shirt / Yellow Shorts Players on
each rod as shown in FIGURE 9.
IMPORTANT NOTE: The goalie should be
at your left and your team (player face)
facing to the right.
Place one P14 Rod Bumper on each rod as
shown in FIGURE 9.
= P20 Black Shirt /
Yellow Shorts Player
= P14 Rod Bumper
STEP 10:
Align P20 Black Shirt / Yellow Shorts Player to each
player hole and attach using H10 Bolts with H11 Lock
Nut as shown in FIGURE 10 and DETAIL B.
Attach P15 Rod End Caps to the rods as shown in
FIGURE 10.
Slide P16 Rod Handle onto each rod end with the
small hole as shown in FIGURE 10.
Attach P16 Rod Handle using H8 Bolts as shown
in FIGURE 10.
DETAIL B
H10
P20
Rod
IMPORTANT NOTE: Soccerman should be in vertical
position while attaching P16 Handles with thumb slot
facing up.
All Rights Reserved.
© 2012 Escalade Sports
PARTS REQUIRED:
1 pc - P21 2 Player Rod
2 pcs - P22 3 Player Rod
1 pc - P23 5 Player Rod
RIGHT
P17 Rod
Bushing
FIGURE 10
Soccerman
facing up
H11
OVERHEAD VIEW
LOOKING DOWN ONTO TABLE
P22
P23
3 Player Rod
5 Player Rod
P16
Rod Handle
H8
For Customer Service Call 1-888-996-2729
10
8 pcs - P14 Rod Bumper
4 pcs - P15 Rod End Cup
4 pcs - P16 Rod Handle
Hole / Handle End
P21
2 Player Rod
FIGURE 9
P15
Rod End Cap
LEFT
P22
3 Player Rod
P16
Rod Handle
NOTE:
Small Hole