UK STATUTORY INFORMATION
ringing detectors may not be given
by the supplier. This apparatus has
been approved for use with the
following facilities:
*Ring Indication - 'Bed-shaker and
lamp' Any other usage will invalidate
the approval of the apparatus if as a
result it then ceases to conform to the
standard against which the approval
was granted.
The connection of the apparatus to
an exchange line or PBX extension is
via a BT modular socket. If this is not
already available please use the form
at the end of this chapter to request
one from British Telecom If your PBX
was not installed by British Telecom
then contact your authorized
maintainer.
Approval number:
NS/3979/3/R/604668
This approval applies to the
Ameriphone Alertmaster
2000/6000.
CAUTION:
The approval of this apparatus for
connection to the British Telecom
public switchboard telephone
network is INVALIDATED if the
apparatus is subject to any
modification in any material way not
authorized by BABT or if it is used
with or connected to:
1.Internal software that has not been
formally accepted by BABT.
2.External control software or
external control apparatus which
causes the operation of the
apparatus or associated call set-up
equipment to contravene the
requirements of the standard set
out in BS6305.
All apparatus connected to this
apparatus and thereby connected
directly or indirectly to the British
Telecom public switched telephone
network must be approved apparatus
as defined in section 22 of the British
Telecommunications Act 1984.
Mains Lamp Connector
The 3-pin 240 Vac connector socket
is for connection to a domestic
240Vac mains lamp only. It may not
be used for any other purpose. The
maximum rating for this is 300W.
Definition of an RBS
An RBS, Relevant Branch exchange is
defined in BS6789:6.1 1986, section
2.4. There is also a proposed British
standard guide for an RBS for PSTN
lines.
E
N
G
L
I
S
H
25